Raisecom iTN8600-I, Product Description

Page: 11 / 71

Raisecom
iTN8600-I (A) Product Description
1 Overview
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
1
1
Overview
This chapter is an overview of the iTN8600-I, including the following sections:

Introduction

Networking application

Ordering information
1.1 Introduction
The iTN8600-I is an OTN device which belongs to Intelligent Transport Network series.
Cooperating with OTN devices, such as the iTN8600-A, the iTN8600-I provides an OTN
access transport platform which carries high-bandwidth uplink services and multiple access
services, meeting requirements for ever-increasing bandwidths and key customer service
bearing.
The iTN8600-I adopts a standard 19-inch wide and 1U high chassis. It can be installed in the
standard cabinet with depth of 600 mm and width of 19-inch, or on a workbench. The
compact design not only makes the device highly integrated but also reduces the overall space.

The iTN8600-I adopts front outgoing design. All interfaces and power supplies are
located on the front panel. So is the air intake vent for heat dissipation (hollowed part),
as shown in Figure 1-1 and Figure 1-2.

The fan is located on the rear panel. So is the air outlet for heat dissipation, as shown in
Figure 1-3.

Two ground terminals are located on the right part of the left side and right part of the
rear panel, thus facilitating selection of grounding location.
Figure 1-1 shows the front appearance of the iTN8600-I-XT4D-AC.