Raisecom ISCOM6800 Hardware Description Download

Page: 30 / 84

Raisecom
ISCOM6800 (A)Hardware Description

3 Cards

Raisecom Proprietary and Confidential

Function

Description

Splitting ratio

Support up to 1:64 splitting ratio.

Protection

Support backbone fiber protection (Type B).

Encryption



Support bidirectional (uplink and downlink) AES-128
encryption.



Support downlink triple-churning encryption.

FEC

Support bidirectional (uplink and downlink) FEC.

Security feature

Support PON interface Layer 2 isolation.

Ethernet OAM



Support IEEE 802.3ah OAM.



Support IEEE 802.3ah MPCP.

3.3.2 Panel and slots

The EP16 card can be inserted into the following slots of the ISCOM6800 chassis:



Slots 1–8



Slots 11–16

Figure 3-3 shows the panel of the EP16 card.

Figure 3-3

Panel of the EP16 card

3.3.3 Interfaces

There are 16 interfaces on the EP16 card.

Table 3-12 lists interfaces on the EP16 card.

Table 3-12

Interfaces on the EP16 card

Interface

Type

Usage

Description

1–16

SFP EPON

Service downlink interface Available optical modules:

1000BASE-PX20-D-M

3.3.4 LEDs

There are 17 LEDs on the EP16 card.

Table 3-13 lists LEDs on the EP16 card.

Summary of Contents for ISCOM6800





















































































Search results

Summary of Contents for ISCOM6800

Reviews:

Related manuals for ISCOM6800

Brands by name

Popular brands

Raisecom ISCOM6800, Hardware Description

Search results

Summary of Contents for ISCOM6800

Reviews:

Related manuals for ISCOM6800

Brands by name

Popular brands