Raisecom ISCOM6800 Hardware Description Download Page 31

Page: 31 / 84

Raisecom
ISCOM6800 (A)Hardware Description

3 Cards

Raisecom Proprietary and Confidential

Table 3-13

LEDs on the EP16 card

LED

Quantity Status

Description

SYS/ALM 1

Green

System working status LED



Fast blinking green (4 Hz): the system is being
initialized.



Slow blinking green (1 Hz): the system is working
properly.



Off/Green: the system is working improperly.

Red

Alarm LED



Red: a fault is generated.



Blinking red: the card is inserted improperly.



Off: no fault is generated.

Orange

Standby LED



Orange: the card is in standby status.



Off: the card is not in standby status.

When the card is in standby status, other
LEDs are off.

LNK1–
LNK16

Green

PON interface working LED



Green: the interface is properly connected and a
successfully-registered ONU is working on the
interface.



Off: the interface is disconnected or no ONU is
successfully registered

3.3.5 Technical specifications

Table 3-14 lists technical specifications of the EP16 card.

Table 3-14

Technical specifications of the EP16 card

Parameter

Description

Dimensions

392 mm (Width) × 222 mm (Depth) × 22.5 mm (Height)

Weight

1.2 kg

Maximum power
consumption

71 W

Summary of Contents for ISCOM6800





















































































Search results

Summary of Contents for ISCOM6800

Reviews:

Brands by name

Popular brands

Raisecom ISCOM6800, Hardware Description

Search results

Summary of Contents for ISCOM6800

Reviews:

Brands by name

Popular brands