Raisecom ISCOM5504-GP, Hardware Description

Page: 21 / 53

Raisecom
ISCOM5504-GP (A) Hardware Description
2 Components
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
9
Table 2-6 Parameters of the GE interface based on 10/100/1000BASE-T standard
Parameter Description
Connector RJ45
Working mode
 10/100/1000 Mbit/s auto-negotiation
 Full duplex and half duplex auto-negotiation
Cable specifications
 When the working mode is 10 Mbit/s or 100 Mbit/s, we
recommend using the Cat 5 UTP cable.
 When the working mode is 1000 Mbit/s, we recommend
using Cat 5 better SP cable.
Compliant standard IEEE 802.3
Supported network protocol IP
2.2.4 LEDs
There are 16 LEDs on the GPSC card, where 6 LEDs are integrated with the RJ45 interface.
Table 2-7 lists LEDs on the GPSC card.
Table 2-7 LEDs on the GPSC card
LED Status Description
PWR Green Power LED
 Green: the power supply is working properly.
 Off: the power supply is working improperly.
SYS Green System working LED
 Fast blinking green (4 Hz): the system is initializing.
 Slow blinking green (0.5 Hz): the system is working
properly.

Off: the system is working improperly.
LINK/ACT
3/4
(SFP optical
interface)
Green Line working LED
 Green: the interface is connected properly.

Blinking green: the interface is transmitting data.

Off: the interface is disconnected or connected
improperly.
LINK/ACT
1/2
(RJ45 electrical
interface
integrated LED)
Green Line working LED
 Green: the interface is connected properly and no data is
being transmitted.
 Blinking green: the interface is transmitting data.
 Off: the interface is disconnected or connected
improperly.
1000M
(RJ45 electrical
interface
integrated LED)
Yellow Electrical interface working rate LED
 Yellow: the electrical interface is working at 1000 Mbit/s.
 Off: the electrical interface is working at 100 Mbit/s.