www.raisecom.com
User Manual
11
Select ‘1’ to set flow scale
Select ‘2’ to set priority for each port
Select ‘3’ set IEEE802.1P service
Select ‘4’ set TOS/DeffServ based priority
Select ‘5’ back to previous menu
Note: priority for QOS is COS, QOS and port.
4.2.6 Advanced configuration
Select ‘5. Advanced Setup’ in main menu to set advanced configuration.
Select ‘1’ set Age, Fast Age and broadcast filtering
Select ‘2’ enable loopback detection function (it will need 3 minute from loopback start to it is be displayed by Console)
Select ‘3’ set IGMP Snooping
Select ‘4’ TRUNKING
Note: ISCOM1024E support 6 port aggregations, you must reboot switch if you add or reduce group. Port aggregations
function is calculated base on source and destination MAC address. When a using port is failure, the traffic will average
to other port.
Select ‘5’ port mirror
Note: the first line is used to define mirrored port. You can define more than one mirrored port, but received data is same
and you can not match mirrored port and targeted port.
Select ‘6’ back to previous menu
