Raisecom Gazelle S1503i User Manual Download Page 12 | Manualshive

Page: 12 / 74

background image

Raisecom
Gazelle S1503i (A) User Manual

1

Overview

Raisecom Technology Co., Ltd.

1

1

Overview

This chapter describes basic information about the Gazelle S1503i, including the following
sections:







1.1 Introduction

The network-manageable guide-rail Layer 2 industrial Ethernet switch Gazelle S1503i
(hereinafter referred to as the Gazelle S1503i), is characterized by all-GE interfaces, guide-
rail chassis, full metal shell, fan-free design for heat dissipation, small size, low power
consumption, and easy installation. The Gazelle S1503i can address the needs of the access-
layer guide-rail switch in industrial control, intelligent transportation, and electrical ring
network scenarios.

The Gazelle S1503i supports complete Layer 2 features and network management
performance, and provides multiple interface types, including electrical interface, optical
interface, and serial interface.

The Gazelle S1503i has several models, which provides different form and number of
interfaces. For details, see section 1.3 Models.

1.2 Features

1.2.1 High reliability

The Gazelle S1503i is characterized by high reliability:



Adopt an industrial-level chip and power module, and is designed with lower power
consumption



Possess a guide-rail chassis, full metal shell, and fan-free heat dissipation design.



Support IP40 protection level.



Support wide-temperature working environment with the operating temperature in the
range of -40 to 75°C and storage temperature in the range of -40 to 85°C.

«
...
10
11
12
13
14
...
»

Summary of Contents for Gazelle S1503i











































































Reviews:

No comments

Related manuals for Gazelle S1503i

Brand: Talkswitch Pages: 17

Brand: Intermatic Pages: 1

Brand: Accton Technology Pages: 10

Brand: Lancom Pages: 23

Brand: Unipoe Pages: 41

Brand: Grizzly Pages: 2

Brand: Sunix Pages: 55

Brand: Leaksafe Solutions Pages: 12

Brand: rako Pages: 5

Summit X450-G2-24t-GE4

Brand: Extreme Networks Pages: 2

Brand: Qvis Pages: 7

Brand: ALFAtron Pages: 23

Brand: Pakedge Device & Software Pages: 8

Brand: Altusen Pages: 2

Brand: Lindy Pages: 2

Brand: Star Trac Pages: 3

SenseVision CSV-1370

Brand: Club 3D Pages: 4

Brand: Channel Vision Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands