Pro2-Series
3D Printer
/ Quick Start Guide
F.
Start First Print
The Pro2/Pro2 Plus units are preleveled in the
factory, but we recommend verifying that the
leveling has not changed during shipping.
First, home the X/Y Axis by selecting the
"home" button, then Z axis "home" button.
If the homing procedures complete without issues,
reposition the print head.
Select "10mm" for "Move Steps" and move X to
50mm, Y to 10mm.
1
Please use the feeler gauge to check the distance
between nozzle and printing platform. The optimal
distance between is 0.2mm.
The best condition of this is that you can feel a little
friction when you slide the feeler gauge into the gap.
2
0.2mm
The distance between the nozzle and the printing
platform can be adjusted by turning the thumb
screw on the left-front corner of the
Z-plate, the higher the screw stands out, the further
the distance between the nozzle to the printing
platform gets.
3
Closer
Further
Feeler Gage
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
26
24
25
27
