Pro-Series
3D Printer
/ Quick Start Guide
F
Start First Print
(continued)
6
During printing, you can check status, printing
time remaining and other parameters from the
touchscreen in the “Home” interface.
NOTE:
The image on the touch screen will only be
shown when the file is sliced by ideaMaker and the
.data file in saved in USB storage or uploaded to screen.
Select “Print” menu, choose “USB Storage” in the
file storage path. Select the file to check the
printing parameters and settings, then press
“Print” to start printing test file.
5
4
USB Storage
The USB storage included with the printer comes
loaded with already sliced models. They are a
good place to start for your first print.
Insert the USB storage into the USB slot on the
side of touchscreen.
