N-Series
3D Printer
/ Quick Start Guide
B
Hardware Installation
(continued)
Feed the filament through the guide tube.
16
Push the filament down to the feed gear
until the gear grips the filament.
NOTE:
For your first set of prints please use the
left nozzle only. The printer has been pre-cali-
brated based on printing with the left nozzle in
the factory. If you want to print with the right
nozzle or dual extrufers, please follow the
instructions on aligning both extruders found
here:
https://www.raise3d.com/pages/faq
.
17
Press the “Utilities” menu on the screen
and set the temperature of the left nozzle
for the filament, then press the “Load”
button. Finish the feeding operation step
by step according to the instructions on
the screen.
NOTE:
This document is set based on the
Raise3D PLA filament, which is delivered
together with the printer. Therefore we advise
that you use this PLA for testing.
15
