WWW.RAISE3D.COM
AMERICA · ASIA · EUROPE
Pro2 Nozzle Installation Instruction
Pro2 Nozzle Installation Instruction
For the instructions on removing or re-installing the assembled hotend onto the extruder head, please
refer to the Manual Pro2
– 402 Hotend Replacement.
STEP 1:
Remove and install nozzle
1.1 Remove the old nozzle from heating block with an 8mm socket wrench.
To prevent damage to components, do not exert force on the throat rube. Hold from the solid section of the heating
block during adjustments.
1.2 Insert a cleaning rod completely through the hotend and ensure that tube is completely clear of
blockages,
