(
)
|
|
Home
Tune
Utilities
Utilities
Move Axes
Move Steps
10.0mm
1.0mm
0.1mm
Filament Loader
L-Nozzle
R-Nozzle
215 C
215 C
0.0
0.0
0.0
0.0
Load
Unload
Load
Unload
The following section will show how the E-Step value can be adjusted directly on the printer.
The E-Step value tells the controller the number of steps (micro steps) that are needed to
extrude 1mm of filament. The new extruder has a different drive gear diameter and gearing
ratio and must be adjusted to extrude the proper amount of material. In return, the increased
step value means that the extruder will feed the filament with higher precision.
'Utilitiesʼ tab select the settings icon in the
upper right hand corner.
Select: More Settings > Hardware > Step Per Unit. > E Steps Per Unit.
Summary of Contents for Bondtech Dual Extruder
