Raiscube R2, User Manual

Page: 8 / 12

RAISCUBE FDM 3D Printer
Add a certain amount of overlapping
extrusion on dual-extrusion prints.
This bonds the different colors
together.
TravelSpeed -- Speed at which travel moves are done, a well built RAISCUBE can
reach speeds of 250mm/s. But some machines might miss steps then.
InfillSpeed: Speed at which infill parts are printed. If set to 0 then the print speed
is used for the infill. Printing the infill faster can greatly reduce printing time, but
this can negatively affect print quality.
Bottom Layer Speed: Print speed for the bottom layer, you want to print the first
layer slower so it sticks better to the printer bed.
Outer Shell Speed: Speed at which outer shell is printed. If set to 0 then the print
speed is used. Printing the outer shell at a lower speed improves the final skin
quality. However, having a large difference between the inner shell speed and
the outer shell speed will effect quality in a negative way.
Inner Shell Speed: Speed at which inner shells are printed. If set to 0 then the
print speed is used. Printing the inner shell faster then the outer shell will reduce
printing time. It is good to set this somewhere in between the outer shell speed
and the infill/printing speed.
Minmal Layer Time: Minimum time spent in a
layer, gives the layer time to cool down before
the next layer is put on top. If the layer will be
placed down too fast the printer will slow down
to make sure it has spent at least this amount of
seconds printing this layer.
Enable Cooling Fan – Check to turn on extruder
cooling fan.