5
Specifications
Single wall connector stove pipe – 6” (15cm) diameter
Chimney pipe – Class A, UL-103 HT, 6” (15cm) diameter
Optimal Thermal Output – 23,900 BTU
(7 kW);
range is 6,800 - 27,300 BTU (2 - 8 kW)
Minimum stove draft pressure at above output – 0.06” WC (16 Pascals)
Efficiency – 74% based on DS standard
Tested EPA emission particulate rate – 4.18 grams/hour
Minimum distance to non-combustible material – 2” (5cm)
Note: Non-combustible must be solid cement or block (not brick or tile over
combustible material).
Minimum distances to combustible material – as shown:
Wall View Corner View
#
Description
RAIS Malta
RAIS
Bando
RAIS Bora
A
Distance to combustible side wall
13”(33cm)
B
Distance to combustible back wall
6”(15cm)
6”(15cm)
5.5”(14cm)
C Corner distance to side walls
5”(13cm)
D Connector pipe to side wall
20.5”(52cm)
21”(53cm)
20.5”(52cm)
E
Connector pipe to back wall
10” (25cm)
F
Corner pipe to side walls
13” (33cm)
G Distance to furniture
36” (91cm)
H Front floor protection
- US
- Canada
16” (41cm) from door opening
18” (46cm)
I
Side floor protection
8” (20cm) from door opening
Ceiling to top of stove
36” (91cm)
Ceiling to connector pipe
18” (46cm)
Note:
A heat shield or protective wall may be used to reduce clearances if it meets the
Assembly Instructions
The RAIS Malta and the RAIS Bora stoves come assembled. To add the Soapstone top
plate on the RAIS Malta, remove the steel top plate and replace with the Soapstone top
plate and the 2 bushings that are supplied. You may also just place the Soapstone top
plate directly on top of the steel plate. CAUTION: Soapstone is fragile, so please handle
with care.
The RAIS Bando soapstone panels come detached. To assemble, first check that all the
soapstone is in good condition. Then, attach the metal frames to the 2 soapstone side
panels, using the screws and washers that are included. Take care not to over-tighten.
H
G
B
E
D A I
H
G
F C,I
F
C,I
