5
. Assemble the first planter tray (one without the inlet
panel)
–
it will only fit one way round,. Place the second
container on top and fit the second bung and Drain-tube
as before.
6. Assemble the second Planter Tray and position the last
container on top to check which side you want the Drain-
tube to fit. It will be easier to take it off again to fit the Drain-
tube and the last bung then lift into place.
Make sure the wall bracket fits through the slot at the back.
If necessary reposition the plinth so that all the modules fit
together properly at the same time.
7
. At this point you can check that the Bungs and tubes are
properly sealed by removing the top 2 modules and pouring
a bucket of water into the bottom container. Repeat for the
other 2 containers and finally fit the top planter tray.
YOU CAN FIT A PADLOCK
THROUGH HERE FOR ADDED
SECURITY
BUNG
We also provide
plastic fixings to
make the lid
even more
secure
4
