Digital Video Recorder User Manual
105
Step 1
Go to
Menu > HDD > Advanced > Storage Mode
.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed
information, please refer to
Chapter 14.3 Managing HDD Group
.
Step 2
Select
General
in the left bar.
Click
to enter editing interface.
Step 3
Configuring HDD group.
1)
Choose a group number for the HDD group.
2)
Click
Apply
to save your settings.
3)
Click
OK
to back to the upper level menu.
Step 4
Repeat the above steps to configure more HDD groups.
Step 5
Choose the Channels which you want to save the record files in the HDD group.
1)
Go to
Menu > HDD > Advanced > Storage Mode
.
Figure 5-30
HDD Advanced
2)
Choose Group number in the drop-down list of
Record on HDD Group
3)
Check the channels you want to save in this group.
4)
Click
Apply
to save settings.
After you have configured the HDD groups, you can configure the recording settings following the
procedure provided in
Chapter 5.2-5.7
.
5.10 Files Protection
Purpose