Appendix 2 - Installation Instructions
– Page 3
3.
Slide the PSU into the mounting seat as
shown. Ensure the PSU orientation
matches the embossed diagram on the
mounting seat.
4.
As you place the unit in the mounting seat,
taking care to align the black rubber
vibration isolators on the PSU with the
corresponding holes in the side frame.
5.
Slide the other mounting frame onto the
mounting seat, taking care to align the
holes in the frame with the black rubber
vibration isolators on the PSU. This may
require lifting the PSU slightly.
6.
Fasten the side rail to the mounting seat using the remaining two countersunk machine screws.
