-
7
-
2.5 Setup the Device and Basic Operations
(1) LOAD BATTERIES OR CONNECT TO POWER BANK
First, open the two ba�ery compartments on the bo�om of the binocular, the ba�ery
compartments’ cover can be removed by turn the securing screws counter-clockwise
with a screw driver or simply a coin. Insert 4 AA Ba�eries into each of the compart
-
ments – total of 8 AA Ba�eries are required to operate this device. (Note: Insert the
Ba�ery orienta�on following the direc�on indicated inside the compartment). Lithium
AA Ba�eries are strongly recommended for maximum run �me, but other ba�ery
types such as Alkaline or Rechargeable NiMh AA Ba�eries may be used as well. (Note:
Do NOT mix different ba�ery types or new and used ba�eries, this may cause damage
to the device) Remove the ba�eries if the unit will be stored for a month or longer
between uses. You can also power this device by connect a Power Bank (5V-6V) to the
Micro USB Port.
(2) REMOVE THE LENS COVER, ADJUST DISPLAY (EYEPIECE) FOCUS FOR YOUR VISION
Remove the lens cover and Press the Power Bu�on to turn on the device. A ba�ery
level icon is displayed at the top right corner of the screen. Point to an object and
adjust the lens focus by rota�ng the dial on the LEFT Lens, con�nue to adjust the focus
un�l the object you are pointed to appear sharp to your eye. (Note: This device uses
digital vision technology, therefore it may be damaged by extended exposure to light.
Avoid poin�ng the device at bright light source such as the sun and always cover the
lens with the included lens cover when not in use).
