www.rainforestautomation.com
RAVEn
™
User Manual
11
RAVEn Information Display
This screen shows information about your
RAVEn
™. Each section has an expander
button in the top left-hand corner that will alternately hide or reveal the detailed
information in that section.
The Connection section shows the serial port that your
RAVEn
™ is emulating through
the USB connection. The Connect button initiates the connection between the
Personal
Meter Reader
™ software and your
RAVEn
™.
The Registration section reports the Install Code and MAC Address, as read from the
RAVEn
™ (you must be connected to the
RAVEn
™ to read this information). This
information is used to register your
RAVEn
™ with your utility. These numbers should
match those found on the Information Label on the underside of your
RAVEn
™.
The Version section reports the
manufacturer‟s information, as read from the
RAVEn
™
(you must be connected to the
RAVEn
™ to read this information). This information is
used to identify the specific revision of the firmware installed on your
RAVEn
™, as well
as the hardware version.
