EMU-2
™
Technical Manual
16
You will see the Serial Port connection information.
(a) Select the serial COM port corresponding to the USB port you have plugged the
EMU-2
™ into. You may have to check with your Windows Device Manager to
determine this.
(b)
Click the “Connect USB” button to initiate the connection. You should see the
“speedometer” screen pop up.
(c)
Click the green “RAVEn” tab to get back to the device information. You should see
that the “Disconnect USB” button is now highlighted in blue, and the “Connect USB”
button is greyed out.
After a few moments, the “Registration” box should display
the MAC Address and Install Code for the device.
Your computer is now communicating with the
EMU-2
™.
a
b
c