EMU-2
™
Technical Manual
12
EMU-2
™
Diagnostic Mode Screens
Hard Reset
The
Hard Reset
screen allows you to perform
a Hard Reset by pressing the Top Button.
Pressing the Bottom Button sends you to the
Device ID
screen.
Device ID
The
Device ID
screen shows the Install Code
(IN) and MAC Address (MAC) for this
particular device. Both are 16 digit hex
numbers. Pressing any button sends you to
the
Link Key
screen.
Link Key
The
Link
Key
screen
shows
the
Preconfigured Link Key for this
EMU-2
™. It
consists of 16 pairs of hex digits. Pressing
any button sends you to the
Device Info
screen.
Device Info
The
Device Info
screen shows the revision
number of the firmware (FW) installed on the
device, as well as the hardware version (HW)
of the
EMU-2
™. Pressing any button sends
you to Active Mode.
Link Key
78:af:a4:da:a3:e9:0b:24
9d:15:20:0e:da:a8:74:d2
Device ID
IN:ee6d785b8006db6d
MAC:00158d00001a56d7
Device Info
HW: 3.0.1
FW: 1.2.12 (3094)
Hard Reset?
Reset
Skip