Rainford RBH-4654 BF, User Manual

Page: 32 / 72

32
 Do not leave abrasive and acidic strains (lemon juice, vinegar, etc.) on enamel, colored
and stainless steel surfaces.
 Make sure of fitting burners properly while you are fitting the pot holders.
 Make sure that the product is clean and dry before using electronic firing system.
Make sure that burner bed and injector hole is clean and dry.
WARNING: Do not wash gas burners in dishwashing machine; color change may occur.
TRANSPORT INFORMATION
 Keep the original package. Carry with the original package, comply with the marking on
the package.
 If the original package is not available, take precautions so as not to harm the external
surfaces of the product and do not put heavy burden on it.
 During transport, carry/ put your product in a way that its top part turns up in a position
that is parallel to the ground.
 During transport, tighten with band the burner parts and pot holders inside the hob.
 Wrap with thick carton or balloon bubbly package and tighten with band in order to avoid
to be harmed during transport.
TROUBLESHOOTING BEFORE CALLING SERVICE
Do not try to repair the appliance in no circumstances. Intervention to the product must be
carried out only by the authorized service.
The following processes should be done before calling the service.
If you do not overcome the problem even if you apply the instructions in this section, contact
with the authorized service.
Lighter is not functioning when pushing the control switchs.
•
Is the electric connection of the hob proper?
•
There may be a blow-out.
•
Is the lighter clean?
• Do the burners (burner, burner cap, etc.) fit properly?
Only one control switch is pushed but all lighters are functioning.
• This is not a fault. The lighter is the center of our system and all lighters function
at the same time.