Rainford RBH-4654 BF, User Manual

Page: 18 / 72

18
Figure 7

The oven must be positioned for that easy access to wall outlet or a duble pole switch
for electrical connection.

Do not position the Power supply cord to contact hot surfaces.

When energy supply cable is damaged, contact with the nearest authorized service
at your location and enable its replacement with the original spare part suitable for
specifications in
Technical Specifications
table.

If the device is connected directly to the device with the electrical wiring system shall be
installed between the two poles of a circuit breaker and the earthing cable must not be
interrupted by a two-pole circuit breaker.

The adapters, multiple sockets or extension cords are not recommended for use. In
accordance with applicable safety laws must be necessary to use an adapter or extension
cord. However, certainly for the adapter and power should not exceed the specified
maximum current capacity.

The electrical safety of the appliance can only be guaranteed when it has been correctly
connected to an efficient earthed power supply, as laid down in the regulations for
electrical safety. The manufacturer can not be held responsible for any damage to
persons, animals or things due to the lack of an earth connection.
START-UP of the APPLIANCE
 Remove all packaging materials.
 Clean the product’s surfaces with a wet cloth or a sponge and then mop them.
NOTE: Some detergents or cleaning agents may harm the surfaces. Do not use
corrosive detergents, cleaning powders/ creams or sharp objects.
 Turn on the gas supply.
 Check whether the gas connections are securely installed and leaked or not.
 Fire the heating zones and check the view of the flame.
NOTE: Flames should be blue and proper. When the flames are yellow, check
whether the head of burners fits properly or clean the heating zone.