6
Technical Specifications
Germanium Two
•
Performance amplifier with integrated high-current MOSFET-switch power supply
•
Inverted Output stages for performance coupling during mono-bridged mode
•
Output stage 2
Ω
stable, bridge and tri-mode capable
•
Amplifier design for minimal noise
•
Reversible safety switch-off with thermal monitoring
•
Safety switch-off with DC current to loudspeakers
•
Safety switch-off for loudspeaker short-circuit and loudspeaker under impedance
•
Integrated flat fuse 2 x 25 A in accordance with DIN-standard, replaceable from outside
•
Soft start remote muting for suppression of switch-on peaks
•
Low power requirements for remote-muting electrical circuits
•
Palladium-plated 35 mm² power and 10 mm² loudspeaker connection
•
High-tech semi-SMD built structure with low coupling wiring
•
Interference-proof certified by CE
Technical Data
Output Power Stereo 4
Ω
2 x 140 Watt rms
Output Power Stereo 2
Ω
2 x 215 Watt rms
Output Power Mono 4
Ω
1 x 430 Watt rms
Total Harmonic Distortions THD+N
<0.02 %
Signal-to-Noise Ratio S/N
>96 dBA weighted
Frequency Response -3 dB
1.5 Hz – 50 kHz
Input Sensitivity Level In
250 mV –76 V
Input Impedance Level In
>10 k
Ω
Connection Impedance Stereo
2 x 4
Ω
/ 2 x 2
Ω
possible
Connection Impedance Mono
1 x 8
Ω
/ 1 x 4
Ω
possible
Connection Impedance Tri-Mode ( Satellite)
1 x 4
Ω
+ 2 x 4
Ω
Tri-Mode
Damping Factor
> 200 at 4
Ω
Operating Voltage
11 V - 16 V DC
Input Power Max. @ 14.4 V
48 A at 1% THD
Idle Input Power without Signal
0.7 A
Temperature Monitoring heatsink
80°C Power Down
Short-Circuit Protection – Overload
Immediate Power Down
Soft start-Muting On / Off
1s Delay
Dimensions: W x H x D
420 x 55 x 235 mm
Weight
4,9 Kg
Approval
CE
Active Controls:
High-pass / Subsonic
15 Hz – 500 Hz, 12 dB/Oct.
Low-pass
50 Hz – 5 kHz, 12 dB/Oct.
Band-pass
15 Hz – 5 kHz, 12 dB/Oct.
Phase Shifter
0° - 180° Infinitely Variable