24
WiFi Module – Configuration
DSP 1.8
An active WiFi connection to the DSP must already have been established.
Via the symbol “?” symbol one reaches the “WiFi Settings”.
The SSID (module name), WIFI password, and WIFI channel can now be changed.
The SSID always begins with “RainbowDSP_”. The module can then be named as you please.
The password must be at least 8 characters long. A combination of letters and numbers is
recommended.
Default WPA password is: rainbowdsp
The WIFI channel should be chosen in such a way that no other active WIFI network is active on this
channel. There are 11 channels that may be selected. A minimum gap of 2 channels to the next WIFI
network is necessary; a gap of 5 channels is recommended for distortion-free operation. The channels 1,
6, and 11 are therefore recommended.
After making changes, store the settings.
The current connection to the WiFi module will be automatically disconnected.
The module then restarts (delay approx. 1 minute).
After this, also restart the DSP manually, so that the WiFi module and DSP can re-establish a stable
data connection. Yellow LED on DSP device must light up again.
A connection to the WiFi module from a tablet/smartphone via WiFi can then be re-established.
WiFi – Music Streaming under iOS
DSP 1.8
1) Establish WiFi connection to DSP 1.8
2) Choose Apple „Airplay
„ function and select „rainbow DSP“ as target device
3) Open rainbow DSP 1.8 App and connect App with DSP
4) Select „Stream“ as input
5) Open iOS music player and select desired title or disc and press play
WiFi – Music Streaming under Android
DSP 1.8
Attention: May vary depending on device and Android version
1) Establish WiFi connection to DSP 1.8
2) Open rainbow DSP 1.8 App and connect App with DSP
3) Select “Stream” as input
4) Open any music player which supports „Airplay
„ and select the rainbowDSP 1.8 as target
device
5) Select desired title or disc and press play