2
Technical Dates
System:
CS 265 X-Plain Pro
CS 220 X-Plain
Max. Input Power:
120 W
150 W
Rated Power:
80 W
100 W
Sensitivity:
90 dB 1W/1m
90 dB 1W/1m
Frequency Response:
50 - 23.000 Hz
50 - 23.000 Hz
Impedance:
4
Ω
4
Ω
Crossover: 2-Way
2-Way
Crossover-frequency:
3.200 Hz
3.200 Hz
Tweeter level-adjustment:
-3 dB / 0 dB / +3 dB
-3 dB / 0 dB / +3 dB
Tweeter-protection: HALO
HALO
Woofer
W 165 X-Plain
W 200 X-Plain
Mounting depth without / with ring: 43 / 41 mm
57 / 55 mm
External diameter without/with ring: 166 / 190 mm
203 / 222 mm
Installation diameter:
143 mm
180 mm
Fastening diameter:
156 mm
193 mm
Tweeter
CAL 25
CAL 25
Mounting-depth
15 mm
18 mm
External diameter
46 mm
46 mm
External diameter with flush-mount
49 mm
49 mm
Safety Regulations for Users...
...to avoid fire and accidents.
You can install our car hifi components only if you are experienced with mechanical and electrical procedures. Pay
attention to relevant safety regulation about the structural car frame, facts about the inner safety in your car and
safety specifications of the car manufacturer.
Caution: Important Operation Instructions
Read carefully before you start installation
•
Operate the loudspeakers only with the attached crossover which is designed for the system.
•
Do not exceed
the indicated maximum operational power.
•
Do not mix up the connection woofer/ tweeter! The tweeter dome would be rendered inoperable immediately.
•
Do not operate
this system
with an active crossover.
The loudspeakers would be damaged, as the tweeter
domes are not designed for the active operation without passive crossover!
•
Don't use additional loudspeakers. That would reproduce a non-linear range. The crossover, tweeter and woofer
would be overpowered.
•
Do not open the crossover to change parts or function (e.g. modification to bi-amping). If opened
all guarantee
claims expire.
•
For safety reasons you should only use the provided screws.
Rainbow is not liable
if you use other ways of
mounting or other hardware.
•
Make sure that the same polarity in loudspeakers, crossover and amplifier is guaranteed. If speakers are wired
out of phase, an unnatural sound without bass is the result.
