Rainbow Technologies CLD54D, User Manual

Page: 12 / 14

1. DPC (Defective Pixel Cancelling) SET : compensates for white and black defects on the CCD
- WHITE TH : a white defect is compensated with an adjustment value from 0 To 255
- BLACK TH : a black defect is compensated with an adjustment value from 0 to 255
- LUM TH : a luminance is compensated with an adjustment value from 0 To 255
2. SYNC MODE : camera sync. is selectable.
INTER : for Internal sync. AUTO : for Line-lock
* V-PHASE is available only in AUTO mode (from 0 to 199)
3. ID : selects the camera ID for RS485 communication with external devices.
ID number can be set from 0 to 254
4. BAUDRATE : adjust the baud rate to match the RS485 communcation speed of the external device
6. PROTOCOL : PELCO-D
1. SAVE / EXIT :
EXIT
OPTION
SPECIAL
DPC SET OFF
WHITE TH 30
BLACK TH 50
LUM TH 150
SYNC MODE INTER
V_PHASE 0
ID 1
BAUDRATE 2400
PROTOCOL PELCO_D
EXIT
SAVE/EXIT
↓
RELOAD/EXIT
↓
EXIT ↓
Select to SAVE all changes made
2. RELOAD/EXIT
Select to RELOAD the previous settings saved before entering the menus
Note : this is not recover the factory default values.
3. EXIT :
If user do not want to save the new adjusted values, select this item
EXIT
SPECIAL
DPC SET OFF
WHITE TH 30
BLACK TH 50
LUM TH 150
SYNC MODE INTER
V_PHASE 0
ID 1
BAUDRATE 2400
PROTOCOL PELCO_D
EXIT
SAVE/EXIT
↓
RELOAD/EXIT
↓
EXIT ↓