4
Filling Water in the Steamer
1. Always unplug the steamer before filling or re-filling it with
water.
2. Place the steamer on a flat surface when filling water.
3. Do not add more than 11 oz. as this will cause water
dripping in the steam and could damage the Steamer.
1.
The Water Tank Cap features a childproof lock. Press Down on the Water Tank Cap
to unscrew it and insert the funnel.
2.
Fill the tank with one measuring (11 Oz.) cup of water.
3.
Screw the Water Tank Cap back into place by pressing it down and turning clockwise.
Tightening the cap too much can damage the steamer.
Refilling Water in the Steamer
1. Press the Steam Lock Button until all the steam pressure is released.
2. Wait approximately 3 minutes for the appliance to cool down before opening the Water
Tank Cap.
3. Push and slowly turn the Water Tank Cap one half turn and wait for the hissing sound (if
any) to completely stop. The hissing sound indicates residual pressure not released while
holding the Steam Release Button.
4. Continue pressing the Steam Lock Button while carefully pressing down on the Water
Tank Cap to unscrew it (this will release the child safety lock).
5. Pour out any water that might have remained from an earlier use. Pouring out the water
before filling it in the water tank helps make sure that the correct amount is added.
Hot water and steam could spurt out if cold water is dropped in
the hot water tank.
