SENS – R – TROL
INSTRUCTION & INSTALLATION MANUAL
The Redox controller is a delicate instrument and in particular the probe should be handled with care. It is covered by a
12 month warranty from date of purchase. This warranty does not cover incorrect use or abusive handling.
The unit should be hand fastened with T piece supplied; excessive force with a spanner may damage the intricate
workings voiding any warranty claim.
The probe is fitted with a protective cover, this should be removed prior to use and kept in a secure location for re-
installing in the event that the unit needs to be returned under warranty.
Ideally the probe should be installed after the filter but before the chlorinator. Refer to Figure: Differential method with
Brominator on page 4.
The probe should regularly be inspected and cleaned for optimum performance. For cleaning use a solution of muriatic
acid.
On occasions the solenoid value can become blocked with hair or lint. Should the feeder either over or under sanitize
check the solenoid valve for correct functioning.
There are two lights on the top of the controller to set the correct reading. Set water to desired level put in sanitiser. Then
check water with test strips periodically until you get the optimum reading. Once the desired level reached, turn the nob
at the top until set level light comes on and dosing light goes out.
The unit is then ready to control at the setting.
Page 1 / 4
Summary of Contents for Sens-R-Trol
Page 5: ...Page 4 4...
