20 1/2"
19 1/2"
384
N3
277
SURFACES
FLUSH
276
277
24"
276
N3
277
8 7/16"
8 7/16"
18"
9 9/16"
276
277
LADDER
BOTTOMS
INSET A
1. Place Castle Rung Ladder Leg
(277)
on a flat surface with the pipe holes facing up. Remove any
objects from underneath the Castle Rung Ladder Leg to prevent scarring of the wood.
*NOTE: Do not directly hit the wood or the Ladder Pipes (N3) with a hammer. Use Pipe
Block (384) with a 3-pound (or larger) sledge hammer.
2. Using Pipe Block
(384)
and a sledge hammer, pound each Ladder Pipe
(N3)
into the Castle Rung
Ladder Leg
(277)
. Pound the inside three Ladder Pipes
(N3)
into the wood so they protrude
approximately
19 1/2"
from the wood and the outside two Ladder Pipes
(N3)
approximately
20 1/2"
from the wood.
*NOTE: Ensure Middle Step/Rung Ladder Leg (276) is oriented properly (as shown in INSET
A). The centers of the first rung holes from Ladder Bottoms should measure 8 7/16".
*SUGGESTION: Use a bar clamp to hold ladder together while pounding on second ladder leg.
3. Position Middle Step/Rung Ladder Leg
(276)
on top of the installed Ladder Pipes
(N3)
. Using a
sledge hammer, pound the Middle Step/Rung Ladder Leg
(276)
onto the Ladder Pipes
(N3)
.
When properly assembled, the ladder should have a width of
24"
.
19
Step 1
Rung Ladder Assembly