Figure 6
PRE-DRILL
LAG SCREW
POSITIONS
Figure 5
SUPPORT BOARDS
Page 4
PRELIMINARY
ADJUSTMENTS
1. Check to see that stair is raised off the door as in Figure 7. If not, loosen wing nuts
on all four spacers, slide stair to top end of spacers as in Figure 8 and re-tighten.
2. Check to see that the set screw on the spring assembly is in the middle position as
in Figure 9. Adjust as necessary.
Figure 7
Figure 8
Figure 9
SET HERE
SPACER
SET SCREW
