Above Ground A-Frame Pool
Ladder Conversion Kit
Assembly and Installation Manual
Part no. 400201
Tools Needed: Rubber Mallet,
cordless drill with Phillips bit.
Step #1
Parts List
■
2 - Return Handrails
■
2 - Mounting Blocks Rails
■
2 - Mounting Blocks
■
1 - Hardware Safety Pack
:
16 -
¼
-10 x 3/4” Philips
self-tapping screws
#1:
Remove the Swing-up Ladder
assembly by flexing the oval
openings outward from the tabs on
the Platform.
#2:
Remove the
two ¼-20 x 3 1/2”
bolts and ¼-20
hex nuts
from the
pool ledge. Then
remove A-Frame
Ladder from pool
and lay it on its side.
#3:
Using a cordless drill, remove
the four
#10 x 3/4” self-tapping
screws
that connect the Handrails
together
#4:
Slide the remaining ladder
assembly out of the two holes
nearest the tabs of the platform and
set aside.
#1:
With the ladder still on its
side, slide the Return Handrails up
through the bottom of the Platform.
Step #2
#2:
Using two
#10 x 3/4” self-
tapping screws,
connect the Hand-
rail to the Return Handrail by using
one screw on the outside and one
screw on the inside. Repeat for the
remaining handrail.
