1
2
4
3
5
7
8
6
WR2-48 Wireless Sensor
2
WR2 Components
A
Controller Interface
B
Sensor
C
Battery Cassette and Lithium CR2032
Battery
D
Sensor Mounting Bracket Assembly
E
Mounting Hardware
F
User’s Manual
G
Quick Reference Guide
H
WR2-48 Quick Reference Label
d
b
NOTE
: Tools needed for installation:
drill, drill bit, and Phillip’s head
screwdriver.
WR2 Benefits
d
l
All settings are programmed through the
Controller Interface device
d
l
Large easy to understand icons communicate
irrigation mode and sensor status
d
l
Sensor LED indicator enables one-person
setup, reducing installation time
d
l
Battery is easy to install / replace
d
l
Aesthetic appearance - no external
antennas
d
l
Easy to install, self-levelling sensor bracket
mounts to flat surfaces or rain gutters
d
l
“Quick Shut Off ” interrupts active
irrigation cycle during a rain event
d
l
Enhanced antenna array provides
superior signal reliability that overcomes
most line of sight obstructions
d
l
Automatically prevents irrigation for
48-hours following a rainfall event (WR2-
48 model only).
Mounting the
Controller Interface
Choose a location near the irrigation
controller / timer.
d
d
CAUTION
: The cable harness is 30
inches (76.2 cm) long, so before
mounting the device, ensure the wires
easily reach the irrigation controller’s
connection terminals.
d
l
Select a flat surface
adjacent to the irrigation
controller.
d
l
For best performance,
the Controller Interface
should be installed at
least five feet (1.5m)
above the ground.
d
l
It is recommended that
the Controller Interface
be installed away from
sources of electrical interference (such
as transformers, generators, pumps, fans,
electrical meter boxes) and metal objects
to maximize communication range.
d
l
Use the mounting hardware supplied.
Attach the Controller Interface to the wall.
