GB
22
If there is an alarm, the screen displays:
2. DOWNLOAD TO A FS1
See § “E- Transmission
3. FS1 MONITORING
If you are close to a FS1, you can monitor it in order to upload any
alarms and the total water consumption.
1.repeatedly press the
key to access the following screen.
2. Press the key. Then the TBOS Manager II Filed transmitter
automatically communicates with the FS1 module closest to the user.
The Field transmitter automatically uploads the following data:
• total water consumption
• Any alarms in case of excessive flow.
This screen means that FS1 #49 on site #3 has an alarm.
You have 2 possibilities:
a) You can acknowledge the alarm by pressing . This
means that you cancel all the alarms detected by the FS1 and that
the FS1 will continue operating normally.
Important:
We recommend checking your installation (possible leakage)
or increasing the maximum volume of water you have programmed
in your TBOS Manager Software.
b) You prefer not to acknowledge the alarm. Then you press the key.
This means that your installation will keep watering only if you have
selected the “ Auto restart “ in your software or will stop if you have
not made this selection.
To upload the total water consumption into your computer, please refer
to your TBOS Manager II instruction manual.
TBOS Manager Anglais new der 5/11/04 12:08 Page 9
