Rain Bird® Algae Control System™ (ACS)
• Owner’s Manual
SAVE THESE INSTRUCTIONS
3
Getting Started
parts
A.
Rain Bird
®
Transducer Unit (
Note:
Direction of ultrasonic waves)
B.
Rain Bird
®
Power Supply Box
C.
Rain Bird
®
Float Unit
D.
Rain Bird
®
Float Shackle
assembly
1.
Position the
float unit (C)
with the white nut facing down and attach it to the
Transducer unit (A)
with the
float Shackle (D).
2.
Mount the Power Supply Box to any convenient flat surface by using screws through the four mounting
holes in the corners of the box . Attach the cord (lead) from the
Transducer unit (A)
to the cord (lead) from the
Power Supply Box (B)
making sure the waterproof connection is securely
fastened by completely tightening each flange .
3.
If you are using an optional
Transducer Power Supply extension Cord (lead) (e),
attach it to the cord
(lead) from the
Power Supply Box (B)
and the cord (lead) from the
Transducer unit (A)
making sure
all waterproof connections are securely fastened by completely tightening each flange .
4.
DO NOT CONNeCT
(plug in) the
Power Supply Box (B)
to the power source* until the
Transducer
unit (A)
is in the water as this will result in the deforming of the transducer head and will void your
warranty .
*If using 24-volt DC power model with batteries see separate instruction booklet .
24 DC
Solar
DC and AC
Parts Inventory
OPTIONAl PART- Purchase separately
e. Rain Bird
®
Transducer Power Supply extension Cord (lead)
Available in 50’ and 100’
