9
STEP 4:
SET THE WATERING TIME FOR EACH STATION
This button sets how long each station (zone) will run. Each station can be sep-
arately adjusted between 0-99 minutes in one minute increments. This
“watering time” is always the same for that station, every time the system
waters. The PC-106/106 series is preset to water each station for ten minutes.
STATION
TIMING
Press
Adjust the time using:
ON
OFF
OR
Station 1 10 min-
To repeat for station #2 to station #6, push “Station Timing” again and repeat
adjustments.
STATION
TIMING
Press
Adjust the time to 00:
ON
Display will show:
OFF
OR
4-B:
To skip a station
STATION
TIMING
Press
Press “Set Clock” to return to the normal time of day display.
After programming the last station,
Display will show:
STEP 5:
START A WATERING CYCLE MANUALLY
5-A:
To start an entire watering cycle
MANUAL
START &
ADVANCE
Press
The display will show:
Station 1 Blink
Each station will run sequentially for its programmed time.
5-B:
To advance to the next station
MANUAL
START &
ADVANCE
Press
Station 2 Runtime
The clock will stop the manual operation after last station has run or you touch
the “AUTO/OFF” button.
The display will show:
Display will show:
Station 2 0 minutes