Installing the PT5002
Mounting Options
The PT5002 can be mounted on a wall, shelf or instrumentation panel� Wall-mount
units are shipped in a NEMA 4X enclosure, ready to mount�
Panel-Mount Installations
OTE:
N
Mounting clips can accommodate a maximum panel thickness of 1�5 in� (38�1 mm)�
5.40 in.
(137.16 mm)
2.65 in.
(67.31 mm)
Panel Cutout
Figure 1: Panel cutout
3.07 in.
(78.00 mm)
5.38 in.
(136.65 mm)
2.54 in.
(64.52 mm)
3.50 in.
(89.00 mm)
6.22 in.
(158.00 mm)
Figure 2: Mounting dimensions
To install:
1� Measure and cut a mounting hole to the dimensions shown in
Figure 1
�
2� Verify that the gasket is secure inside the mounting bezel�
3� Insert the unit through the panel cutout�
4� Secure the unit to the panel with the provided mounting clips�
Page 9
June 2020