2
TO CALL UP A PROGRAM
Press
SET
CLOCK &
PROGRAM
a fourth time until display reads:
Display will indicate
Day:(Mon) Watering
will
occur for the “A” Pro-
gram
Press
WHICH
DAYS TO
WATER
.
Press
OR
until display indicates
ON
if you wish
Display will indicate:
For program “A.”
which you want to program. Having two programs is like having two controllers; you
can water lawns and shrubs on different days or separate drip irrigation stations from
sprinkler stations. Because the "A" program has the default settings, it is best to use
"A" as your primary program and set it first, then set schedule "C" if you need the sec-
ond program.
VARIABLE DAY CYCLE
The EZ1-D Controller comes from the factory with a preset 7-day cycle. (This means
the controller will operate as programmed for 7 days, then repeat the cycle beginning
with day 1.)
If you want a 3-day cycle, for example, program days 1,2 and 3 only as above, and
then proceed as shown below.
SET
CLOCK &
PROGRAM
STATION
RUN
TIME
WHICH
DAYS TO
WATER
MANUAL
ON/STA.
ADVANCE
TIME OF
DAY TO
WATER
PGM
A
/
C
SYSTEM
OFF
/
AUTO
TO SET DAYS OF THE WEEK
to water, or
OF
if you do not wish to water on this day. Repeat for each day of the week.
OR
Display will indicate
Day:(Mon) Watering
will
NOT
occur for the “A”
Program
Now press
Display will indicate:
Press
and keep depressed for at least 2 seconds. Display will indi-
WHICH
DAYS TO
WATER
PGM
A
/
C
By repeatedly pressing
you can access program "A" or "C," depending on
PGM
A
/
C