22
Rugged Rails 2-8-0 Steam Engine
FYS
Remedy
Once in FYS, the engine doesn't
go into reverse.
When the FYS enters its last
sequence the bell automatically
comes on.
When FYS is enabled, pressing
the whistle and bell buttons has
no effect.
I push the Direction button but the
next sound clip in the sequence
does not play or the engine does
not come out of FYS after the
fourth press of the Direction
button.
So that FYS effects can be as
realistic as possible, Proto-Sound
2.0 disables the reversing unit
whenever FYS is enabled. This way
the engine remains still at its stop as
the operator cycles through the FYS
sequences.
FYS is programmed to start ringing
the bell at that point. After
approximately 12 seconds, it will
automatically turn off.
Because FYS must control various
effects in each sequence, Proto-
Sound 2.0 takes control of these
sound effects until you exit FYS.
Each FYS clip must play approx. 30
seconds before FYS will advance to
the next step in the FYS cycle. Wait
at least 30 seconds in each FYS
sound clip before pressing the
Direction button.
FYS
Remedy
