5
NYC Dreyfuss Operating Manual
occurs, we recommend that you inspect and/or replace the wick taking care to not run the
engine without fluid in the future. You can inspect the wick to see if it needs replacement by
removing the smoke unit inspection cover as seen in Fig. 4. After removing the screws lift
the inspection plate away and inspect the wick. If the wick is darkly discolored and hard, it
should be replaced.
NOTE:
Replacement bottles of smoke fluid,
such as LGB or LVTS Fluid are available at
most hobby shops. Replacement smoke unit
PROTOSOUNDS™ OPERATING INSTRUCTIONS
The MTH ProtoSound™ digital sound and train control system provides the operator with
unprecedented realistic operation on your model railroad. In addition to actual steam
CD-equivalent, 16-bit digital sounds, you get the following features, each of which is further
described on the following pages. Every feature is easily and remotely controlled from any
compatible AC transformer equipped with a whistle button. See the chart on page 25 for a
list of compatible transformers.
Built-In DCRU Reverse Unit
Authentic Bell &Whistle
Enhanced Neutral Steam Sounds
Squeaking Brake Sounds
Passenger Station Proto-Effects™
Optional Remote ProtoCoupler
Self-Recharging Battery Back-Up System
Remotely Controlled Reverse Unit
Remotely Activated Lock-Out
Remotely Adjustable Steam Chuff
Volume
Upgradeable Microprocessor Options
Smoke Unit
Circuit Board
Mounting Screws
Smoke Unit Frame
Mounting Screws
Figure 4: Inspecting the smoke wick
