RailKing K-4 Pacific Steam Engine
24
Additional Features Accessible With The DCS
Remote Control System
(Additional equipment required)
While conventional mode operation of a Proto-Sound 2.0 engine yields
wonderfully realistic sound and several train control features, command mode
operation allows the user to access a world of command functions never before
accessible to O Gauge railroaders. With the addition of the DCS Remote Control
System (including a DCS remote handheld and Track Interface Unit) users gain
many advanced features, including:
•DCS Proto-Speed Control - Establishes desired locomotive speed in
scale miles per hour increments via a thumbwheel control and allows
operator to set maximum speed and acceleration/deceleration rates
•ProtoSmoke® Variable Output Control - Controls how much smoke
each engine outputs and matches smoke to locomotive speed
•Locomotive Lighting Control - Controls locomotive headlights, marker
and interior lights, beacon lights, ditch lights, and MARS lights
•Emergency Stop-Single button push stops all Proto-Sound 2.0 trains but
does not turn off the power
•One Touch Global Mute/UnMute-Single button mutes or unmutes all
DCS-controlled locomotives' user-defined actions, including sound, lights,
and smoke
•Proto-Dispatch Operation-Public Address-like feature allows users to
speak through locomotive speaker during operation
•Proto-Cast-Allows users to play audio recordings through locomotive
speaker during operation
•Proto-Doppler Sound Effects Set Up-Users can configure locomotive
for Doppler Operation, including setting distance points for Doppler
start, repeat, and stop modes
•Independent Volume Control of Engine Sounds, Bell, Horn & Whistle
for each Locomotive
•Control up to 50 different DCS-Equipped Locomotives at one time with
multiple TIUs
•Proto-Effects™ Set Up-User can select individual Proto-Effects™
operations to be active or inactive, including cab chatter, train wreck
sounds, coupler sounds, Direction Control Set Up-User can set initial
individual start-up direction (start in forward or reverse) for double-
heading operations
•Locomotive Consist Set-up-User can determine locomotive values for
consist make-ups, allowing multiple locomotives belonging to a consist to
operate together
Basic Operation
The Throttle knob controls how fast your train will travel.
Turn the throttle knob up ½-way, until the engine and caboose lights shine bright.
Put the engine into motion by pressing the Direction button on your transformer
once. (hold it for approximately 1 second)
If the engine does not begin to move as soon as you firmly press the Direction
button, you may not have sent enough voltage to the track to make the train move.
Turn the throttle up a bit higher until the train begins to move.
- To increase or decrease track voltage, and therefore train speed, turn the
throttle control knob. Turning clockwise will increase voltage and speed, while
turning counterclockwise will decrease voltage and speed. The engine will maintain
the speed you set after you release the throttle until you turn it again to change the
voltage and speed.
- To sound the bell, in an engine equipped with a bell firmly press and release
the Bell button. To turn the bell off, press and release the Bell button again. The
bell will continue to ring from the time you turn it on until you press and release
the button again to turn it off.
- To sound the whistle, firmly press the Horn/Whistle button. The
whistle will sound for as long as you continue to depress the button. It will stop
when you release the button.
- Your train is programmed to start in neutral. The train will always
cycle neutral-forward-neutral-reverse with each press and release of the direction
button. The engine is programmed to restart in neutral each time the track voltage
is turned off for 25 seconds or more.
Activating Features
Throttle
Bell
Horn/Whistle
Direction
RailKing K-4 Pacific Steam Engine
5
Cycle Phases
Neutral
Neutral
Forward
Reverse
