23
RailKing Crusader Operating Manual
the next available setting and provide the appropriate bell indicator. The
settings for Reset 28 are 1 Bell = ON, 2 Bells = OFF. When the desired
setting is reached, lock the changes by interrupting the throttle and cycling
the engine into forward.
Activating Remote Lock-Out Control -
Reset Feature 40-(8 Clanks, 0
Clinks)
Reset Feature 40 allows you to enable the Reverse Unit Lockout feature of
Proto-Sound®. When enabled, you are able to lock the engine to run in
only one of the directional states (Forward, Neutral or Reverse) whenever
power is applied. The most common use for locking out an engine is in the
use of power blocks on a layout. To use, cycle to Reset 40 and press the
Horn/Whistle button. The engine will play a series of bells. This indicates
the current setting. Each time the Horn/Whistle button is pressed,
Proto-Sound® will cycle to
the next available setting
and provide the appropriate
bell indicator. The settings
for Reset 40 are 1 Bell =
OFF, 2 Bells = ON. When
the desired setting is
reached, lock the changes
by interrupting the throttle
and cycling the engine into
forward.
Resetting All Proto-Sound® Options To Factory Defaults -
Reset Feature 18 -(3 Clanks, 3 Clinks)
Reset Feature 18 is the most
powerful of the Reset features
available. Using Reset Feature
18 allows you to override all
changes in programming and
return all Resets to the original,
out of the box settings. To use,
cycle to Reset Feature 18 and
press the Horn/Whistle button.
The engine will play a distorted
bell, followed by a clear bell sound. This indicates that the Proto-Sound
system has restored all settings to factory default settings. Lock the changes
by interrupting the throttle and cycling the engine into forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
40 Times
Listen For 8 Clank
And 0 Clink Sounds
Push The Horn/Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Lock-Out Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
18 Times
Listen For 3 Clank
And 3 Clink Sounds
Push The Horn/Whistle Button
Until You Hear
A Warbled Bell Ding
Interrupt The Throttle
To “Lock-In”
The Default Setting
H
