CABLE CURVES
UPWARD
Remote Control
If your set is so equipped, the remote and lock-on are designed for use with moderate
power supplies such as the one included with this set. It is compatible with virtually any
manufacturer's engines.
®
Note:
The RailKing Remote Control and Remote Lock-on will not operate engines
®
™
™
equipped with pre-1997 versions of Proto-Sound or with Proto-One, Proto-Plus,
™
Proto-Deluxe, aftermarket systems.
6
!
Plug tender plug into boiler socket at the back of cab.
!
Connect the draw bar between the engine and tender.
DO NOT CONNECT
This Engine To A
Tender From
Another Engine; It May
Cause Serious Damage.
Look at the bottom of the
engine and tender where
each will have a color-coded
stamp. If they match you
may connect those two
pieces; if not, don't.
Insert two AA batteries (not
included) into the remote.
Green LED flashing
indicates lock-on is
receiving signals from
remote.
Controls trains from
up to 15 feet from
the lock-on.
Aim remote control at the
rounded side of the lock-on
sensor to send track. Lock-
on sensor can be rotated to the
direction you will most often
signal.
Remove phillips screw with
screwdriver on back of remote.
STEP
1
1
STEP
2
2
STEP
3
3
STEP
4
4
STEP
5
5
RailKing 2-8-0 Steam Passenger Set with Loco-Sound™
