Operator’s Manual
© Copyright 2018 - Rail-Ability Limited
Page
41
of
71
Conversion
If the trailer cannot be lifted off track in one operation while the host machine is in rail mode, then the
end of the trailer nearer the host machine must be carefully derailed in order to prevent runaway.
At all times, the trailer must be secured to prevent runaway.
FAILURE TO COMPLY WITH ANY OF THE REQUIREMENTS STATED IN THIS DOCUMENT MAY
RESULT IN DAMAGE TO THE MACHINERY AND/OR THE RAIL INFRASTRUCTURE AND MAY
RESULT IN SEVERE INJURY OR DEATH TO PERSONNEL.
15.3 Uncoupling and Off Tracking
Bring the towing machine to a stop, apply the towing vehicle parking brake and switch off the engine.
Apply towing vehicle parking brake but not service brake. Stop engine. Remove service brake
connection first, then the park brake hose.
Disconnect the air brake hoses, and replace the dummy blanking plugs.
Using the towing machine, push/pull the trailer a few feet. Trailer wheels should skid and not rotate.
Providing the brakes have applied uncouple the tow bar.
