STARDOM IDE RAID Solution
18
3-3
Macintosh Operation
Once the SR3500 Hardware installation is complete, you can
start connect the device to your Macintosh.
1. Locate the built-in the 1394 and USB2.0 port for your Mac G4,
G3, iBook or iMac DV. Connect the 1394 cable to the 1394
port or connect the USB2.0 cable to the USB2.0 port.
2. Connect the other end of the 1394 cable to the 1394 port of
SR3500.
3. Attach the power cord to the SR3500.
4. Power on the SR3500.
5. Power on your Macintosh (if it is off.)
6. Install the 1394 or USB2.0 device driver for your device.
7. Install the 1394 or USB2.0 HDD drive (Refer to Appendix A for
details)
8. Restart you Macintosh computer.
9. The SR3500 is now ready to use.
Notice:
If there are other 1394 devices connected to SR3500, you need
to keep SR3500 power on so the signal may pass through the
SR3500 to the other 1394 devices.
