SR2611-2S-S2R+ (6G)
5
6. Computer Set Up
When the hardware setup for is complete, you are now ready to turn the machine on.
After the hardware installation is complete, the will be treated as one single hard drive. Set
the hard drive to AUTO in the computer’s BIOS. When the computer is turned on, the system will
retrieve the following information:
1. In , the installed hard drive can be detected by the Device Manager of Computer
Management for Windows.
2. Customers can choose to format the hard drive by using the Disk Management tool of the
operating system before using the .
At this point, the installation process is completely finished. The user can freely retrieve and save
data to just like retrieving and saving data to a regular hard drive. If the user experiences
any abnormality during the operation, please refer to the trouble shooting Q&A section in Appendix.
2. RAID 0 Mode
1). Insert two brand new hard drives into .
2). The RAID 0 combines two hard drives to work as a large hard drive which provides the efficient
read/write performance.
The computing method of RAID 0 hard disk capacity:
[total capacity] = [hard drive number] x [minimum capacity of hard drive]
Ex:
2 × 500GB HDD=2 × 500GB=1000GB
1 × 500GB HDD+1× 200GB HDD=2×200GB=400 GB
