
iR2623-S3 User Manual
3
2. Operating Information
3. Hardware Requirements and Precautions
4. Hardware Installation Procedure
Operating Temperature : 0 ~ 40 °C (32 ~ 104 °F)
Storage Temperature : -10 ~ 70 °C (14 ~ 158 °F)
Line Voltage : 5V DC
1. Computers or servers with SATA I & SATA II & SATA III.
2. Hard drive with SATA I & SATA II & SATA III
3. You are strongly advised to set the storage mode (the default is the Independent mode) before
using the IR2623-S3.
4.
The product allows the user to simultaneously utilize two hard drives manufactured by different
companies. However, if the user expects better efficiency, we strongly recommend the users to
use hard drives manufactured by the same manufacturer.
5. Please make sure that the two hard drives are free from bad blocks or defects prior to installation
in order to avoid system crashes or data loss.
6. The actual storage capacity of IR2623-S3 recognized by the system may differ from the total
capacity stated on the hard drives combined once the drives have been formatted.
7. It is highly recommended for users to back up important data contained within the IR2623-S3
unit on a regular basis or whenever the user feels necessary to a remote or a separate storage
device. Stardom will not be responsible for any lost of data caused during the use of the unit or
the recovery of the data lost.
Please follow the instructions below to complete the hardware installation.
Open the package and take out the product making sure that all the enclosed contents are
not damaged or missing. Should you find damages or missing contents, please contact your
supplier immediately.
Place the system on a stable surface. Ensure that it is well ventilated without blockage to
the vent and kept away from areas near water and damage prone areas.
Use the key included in the accessory kit and inserted into the key access opening to eject
the removable drive tray latch and extract the removable drive tray.
Mount your hard drives onto the removable drive tray and secure it with the screws included
in the accessory kit to avoid any damage to the hard drive due to accidental movements.
When the hard drive installation has been completed, insert the hard drive tray into the
system horizontally and secure the latch into place.
Use the preferred cable included to connect your computer to the relative interface
connection on the IR2623-S3 unit.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Note :
Once the drive mode configuration has been completed, re-configuration using the same hard
drives to set the drive mode will result in complete data loss. If you must change the drive
mode, make sure to backup all data prior to the mode change.
Summary of Contents for InTANK iR2623-S3
Page 1: ...iR2623 S3 User Manual InTANK ...
Page 2: ... InTANK iR2623 S3 User Manual 1 InTANK iR2623 S3 產品使用說明 12 iR2623 S3 User Manual V1 1 ...
Page 12: ...iR2623 S3 User Manual 10 5 About Indicates GUI Management Software version 4 S M A R T ...
Page 23: ...iR2623 S3 User Manual 21 5 關於 GUI 軟體版本 4 S M A R T ...