Raidon GT8670-TB3, User Manual

Page: 4 / 32

SafeTANK GT8670-TB3 User Manual
2
Front and Rear Views
3. Hardware Requirements and Precautions
1. This system can only transfer data to one computer through one interface at a time.
2. Please make sure that the hard drives are free from bad blocks or defects prior to installation in
order to avoid system crashes or data loss.
3. Whenever turning off or unplugging the GT8670-TB3 from your computer system becomes
necessary, always remember to safely remove it from your operating system first.
4. When the GT8670-TB3 is connected to the computer system, it's prohibited to remove, insert or
swap the hard drive while data transfer is being performed.
5. If you will be incorporating either software or hardware RAID functionality to operate with
the GT8670-TB3, it is important to understand the RAID level and its component that will be
incorporated and the precautions to take as each RAID level and component may function
differently and contains various limitations.
6. The product needs to be restarted after adding or changing the RAID mode, and the update is
guaranteed to be the new RAID mode.
7. It is highly recommended for users to back up important data contained within the drives of the
GT8670-TB3 on a regular basis or whenever the user feels necessary to a remote or a separate
storage device. RAIDON will not be responsible for any lost of data caused during the use of the
GT8670-TB3 or the recovery of the data lost.
A. HDD access light
B. HDD enclosure key lock
C. HDD enclosure button
D. Power status light
E. System status light
F. Thunderbolt™ port
G. Mini DisplayPort
H. Power socket
I. Fan
J. Fan speed switch
K. Mute switch
L. Power switch
M. Anti-theft lock
Note:
If you do not have 8 HDDs, please follow the above HDD number sequence to
load all your in hand HDDs.
Hard Disk Location 0
Hard Disk Location 4
Hard Disk Location 2
Hard Disk Location 6
Hard Disk Location 1
Hard Disk Location 5
Hard Disk Location 3
Hard Disk Location 7
Front View Rear View