background image

Snapshot space: there are six options from selection of 0.5, 1, 1.5, 2, 2.5 and 3 (default is at 2), these 

numbers representing the multiple ratios for the VD., For example, when multiple ratio is at "2" and VD 

is 100GB, system will create a volume of 200GB for Snapshot space.

Threshold: there are three options in percentage from Snapshot space usage of 40%, 50% and 

60%. When Snapshot space usage exceeding selected percentage, system will take one snapshot 

automatically.  

Restart the task an hour later if failed: When a Snapshot failed, system will delete all existing Snapshot 

and auto-create new Snapshots after one hour.

        Note : These functions only for the Snapshot which be created from Clone, it will not be functional by manual  

                   setting Snapshot.

3.5.5 Snapshot 

The Snapshot function stores current data and settings with a recover point such that system can be 

restored to selected recovery status for the prevention of virus attack, system failure and human errors. 

It is recommended to reserve as large as possible from the VG space for Snapshot storage and the 

minimum requirement of snapshot space is 1GB. More of Snapshot settings can be configured under 

“Snapshot option”.

Figure 3.5.5.1

1. Cleanup snapshot

    Erase all the Snapshot data in given virtual disk.

2. Auto snapshot

    Set up the system to run Snapshot function regularly and automatically.

Figure 3.5.5.2

Introduction to the GUI

  35

Summary of Contents for GR2880-8S-U5










































Reviews: