Raider RDP-EP10S, User Manual

Page: 9 / 62

9
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire
and / or severe injuries. Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the occurrence
of an accident.
1.2. Do not operate electrical plane in an environment with increased risk of an explosion in the vicinity
of flammable liquids, gases or powders.
1.3. Keep children and bystanders at a safe distance while working with electrical plane. If your attention
is diverted, you may lose control over the power plane.
2. Safety when working with electricity.
2.1. Plug electrical plane must be suitable for contact. In no case is allowed to modify the structure of
the plug. When working with zero appliances, do not use adapters to plug. Using original plugs and sockets
reduces the risk of electric shock.
2.2. Avoid touching your body to earthed bodies, for example pipes, heaters, stoves and refrigerators.
When your body is grounded, risk of electric shock is greater.
2.3. Protect the power plane from rain and moisture. Penetration of water in the electric plane increases
the risk of electric shock.
2.4. Do not use a power cord for purposes for which it is provided, for example, to carry electrical plane
for cable or removing the plug from the outlet. Protect cords from heat, oil and contact with sharp edges or
moving units of machines. Damaged or twisted cables increase the risk of electric shock.
2.5. When working with electrical plane in the open switch so only in plants equipped with electric
switch Fi (switch safety shut with Residual protection), and current leakage, in which trigger must be no
more than 30 mA. Use only extension, suitable for outdoor use. Using the extension, designed for outdoor
use reduces the risk of electric shock.
2.6. If it is necessary to use the power plane and in a humid environment, including the machine only
in installations equipped with electric switch Fi. Use of such a safety switch Fi currents reduces the risk of
electric shock.
3. Safer way of working.
3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use
electrical plane when you are tired or under the influence of drugs, alcohol or narcotic drugs. An instant
distraction when working with electrical plane may have the effect of extremely serious injuries.
3.2. Work with protective work clothing and always with safety glasses. Wearing appropriate for their
operations personal protective equipment such as breathing masks, healthy, tightly closed shoes with
a stable grab, safety goggles, protective helmet and silencers (hearing protectors), reduces the risk of
accident.
3.3. Avoid the danger of incorporating electric plane inadvertently. Before you turn the plug into the
power supply network, make sure the trigger switch is in position “off”. If, when you carry the power plane,
keep your finger on the trigger switch, or if you submit a voltage of the power plane when turned on, there
is the risk of accident.
3.4. Before you turn on the power plane make sure you have removed it all utilities and keys. Utilities,
forgotten rotating unit can cause injuries.
3.5. Avoid unnatural positions of the body. Work in a stable position of the body at any time and keep
the balance. So you can control the electrical plane better and safer, it becomes an unexpected situation.
3.6. Work with appropriate clothing. Do not operate with loose clothing or ornaments. Keep your hair,
clothes and gloves at a safe distance from rotating units of electrical plane. Robes, attire, long hair can be
caught and carried away by the rotating parts.
3.7. If it is possible to use external aspiration system, make sure it is switched on and functioning
properly. Use of the aspiration system reduces the risks due to the discharge dust at work.
4. Thoroughly respect to the electrical plane.
4.1. Do not overload electrical plane. Use the power plane only in accordance with its purpose. You will
operate better and safer when using the appropriate power plane in the specified by the manufacturer a
range of loading.
4.2. Do not use the planer, whose starting switch is damaged.
Plane, which can not be excluded and included as intended by the manufacturer, is dangerous and