7
Original instructions’ manual
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic tools - RAIDER. When
properly installed and operating, RAIDER are safe and reliable machines and work with them will deliver a real pleasure. For your
convenience has been built and excellent service network of 40 service stations across the country.
Before using this machine, please carefully acquainted with these “instructions’ manual”.
In the interest of your safety and to ensure proper use and read these instructions carefully, including the recommendations and
warnings in them. To avoid unnecessary errors and accidents, it is important that these instructions will remain available for future
reference to all who will use the machine. If you sell it to a new owner “Instructions’ manual” must be submitted along with it to enable
new users to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark RAIDER.
Address: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel +359 700 44 155, www.raider.bg; www.euromasterbg.com;
e-mail: [email protected].
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification: Trade, import,
export and servicing of hobby and professional electrical, mechanical and pneumatic tools and general hardware. The certificate was
issued by Moody International Certification Ltd, England.
TECHNICAL SPECIFICATIONS
Parameter
Units of
measurement
Value
Model
-
RDI-SA25
Input voltage
V
230
Frequency
Hz
50
Rated Power
W
320
Variable Speed
min
-1
10000
Borad size
mm
115x229
Abrasive paper size
mm
115x280
Protection Class
-
II
General description of the machine
Sander is powered by a collector of single-phase motor. Thanks to the use of adequate insulation is not possible for metal parts
that could be touched and yet could accidentally be under tension. Grinder does not require protective grounding (insulation class II).
Sander is designed for surface grinding of the final woodwork, polishing wooden surfaces coated with varnish, polishing
lacquered metal surfaces, removing rust or traces of polish before re-polishing, finishing of metal surfaces, etc.
The areas of use are making repairs, carpentry and other work.
1. Button to hold the trigger button in the on position (for convenience for longer operation).
2.Switch (On / Off).
3. Dust outlet.
4. Clamps for attachment of the sanding sheet.
5. Sanding machine plate.
6. Dust extraction openings.
7. Velcro
Unprotected work with the workpiece or to touch the moving parts of power can lead to severe physical injuries and noise impact
to hearing damage if not complied with the rules listed below and those in the “Safety Instructions.”
Safety requirements
EN
Summary of Contents for RDI-SA25
